|
Post by Keith Tanaka on Aug 14, 2014 16:00:08 GMT -8
BPR now carries a new "uni" sidewinder motor bracket made by Bryan Warmack. This new motor bracket is the same as the original Warmack sidewinder bracket except it has axle holes for either a TSR D3 or Falcon 7 motor. The Warmack sidewinder bracket is ideal for any D3 Hardbody class as it can handle .950" or 1.000" rear tires while providing the minimum .050" chassis clearance for the rear tires. Since the original Warmack motor bracket had enough room to add an additional axle bearing hole, Gonzo suggested that Warmack add these to provide a motor bracket which can be used with either a TSR D3 or Falcon 7 motor. Here's a photo showing the new motor bracket: The new bracket is shown in the lower right. At the top of the photo is the Warmack front end and guide flag holder set. Thanks Gonzo and Bryan Warmack for this latest enhancement to the original motor bracket. Keith
|
|
timneja
Full Member
Love racing these hard body cars!! The new knee is working better--so I'll be back soon!!
Posts: 191
|
Post by timneja on Aug 23, 2014 6:41:17 GMT -8
Looks good--and if you want an "angle"--it looks like there's enough room on the bracket to simply put the bend in!! NICE!!!
|
|